Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a switches network with 4000s and 2950s. There is a large hall which is equiped with wireless LAN. The access points are divided over several 2950s. I get a lot of warnings:%SYS-4-P2_WARN: 1/Host 00:90:7a:00:c4:33 is flapping between port 3/5 ...
The catalyst 4006 does not support bridge groups.Because switches are more than bridges. It would be weird, to create a brigde-group on a router inside a switch.
The docs tell me this warning is generated when an address switches link twice in 15 seconds.With Wireless basestations connected to different switches, I can imagine this happens if the device is on the edge of two base stations.Can this affect my s...
There must be a configuration flaw in IPX on the 4006. Have you copied the IPX config from the 2600 to the 4006?That does not always mean it works though..Can you post the IPX configuration of both routers?You can also mail it, if you do not want thi...
As far as I can tell it is not posible to have a channel of links with different bandwidth. Everything I've read suggest link of the same BW.there is configuration needed on the server side of the channel. I'm not a server guy so I don't know what, b...
