I'm having trouble understanding this VLAN Quiz question on YouTube. If SW1 is set to VTP Transparent mode, wouldn't this mean that it does not broadcast its VLANs to the network? My understanding was that Transparent mode only forwarded information ...
Working with 2 Networks: NW1 using static IP NW2 using DHCP. Pings are successful across LANs but drop between the routers. The routers can ping each other individually, but their networks are inaccessible. May I please have assistance? pa...
Transitioning from NetSim Lite, and I'm stuck trying to create my first network. PC's cannot Ping to any device on the network. I've tried setting up IP addresses and DHCP, but PCs tell me DHCP requests fail. The switches have MAC addresses but simul...
I'm sorry, it seems I misread the question. SW4 was in VTP Transparent mode, while SW1 was in VTP Server Mode.This would mean that all other switches receive the new VLAN 99 broadcast except for SW4 which does not participate but forwards the frame. ...
Hello, I'm still not understanding it. Why would VLAN 99 be visible to VTP Servers when it was created by a VTP Transparent Switch? According to Cisco:Transparent—Allows you to relay all VTP protocol packets that it receives on a trunk port to all ot...
- I renewed the IPaddress on LAN 2- No route on R1- Established Default-gateway for R2 Pings from PC1.11 (Bottom of Right LAN) C:\>ping 192.168.3.2 (R2) Pinging 192.168.3.2 (R2) with 32 bytes of data: Reply from 192.168.3.2: bytes=32 time<1ms TTL=25...
Hello, I've achieved connectivity. Edits:1) R2- Router Rip | Version 2 | Advertise subnet 192.168.2.254 (SW2 for LAN 2) | no auto-summary- Interface Gi0/1 (LAN 3 Routers) IP Router 0.0.0.0 0.0.0.0 192.168.2.254 (assigning LAN next hop to R1)- Interfa...
