Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
First I'll say I'm not a Cisco engineer, but I do know wifi and controller software from other vendors.We recently activated 5Ghz (2.4Ghz was already enabled) for a SSID in one of our locations. This location has >160 AP's and roughly 1,300 client d...
wireHello,We have a Cisco based wireless enterprise based on 5508 WLC's (Firmware: 8.5.171.4). We are struggling with periodic "disconnects" of Windows based clients. I'm not a cisco expert, but am fairly well versed in WLAN's in general and Window...
Apparently, I never posted what our actual solution was... Turns out, the policy in our NPS setup (Windows) was configured to require re-authentication every 20 minutes instead of every 1440 minutes as designed for our site. The policy wasn't applie...
Turns out that wasn't very helpful... in the 5500 WLC, we can select protocols like 802.11a, b, g, n, etc, etc... but some of those overlap with 2.4Ghz (like 802.11n) so it generated mix results... Perhaps newer controllers have better firmware for ...
We dang, that's pretty simple as I assumed it would be. I used to have read-only access to our WLC's here at work... but that access was removed and now I have to rely on someone else to do these things....
My site is part of a large corporate enterprise environment. Globally we have well over 65,000 windows 10 client machines... I would say 60-70% of them running the same OS and Intel driver version as me. In each of our sites around the world, we ha...
