Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just bought some IE2000 hardened switches and am wondering why the switch doesn't boot from the SDflash card similar to the IE3000/CGS2520 switches.I want to be able to swap out the switch, should it fail, with a new one and just take the sdflash car...
Hi,I have a situation where two of my CGS-2520-16S-8PC switches are not applying POE power to the copper ports, but showing power inline, two ports are showing power applied. Shutting down the port and re-enabling it will return the port to normal an...
We have just had a Mesh designed by an external company, and when we plugged it in we began have large numbers of mac-flap notification and more than 700mb of traffic sent across our data network.Our setup includes 2 5508 controllers and 9 152x APs3 ...
Hi, I've read that I must be running version 3.x of the subsys as opposed to the version 2.x to allow for using the Version 5 ips signatures.My question is; How do I go about upgrading the subsys?I have loaded 12.4.25a, but the subsystem is still sho...
Hi all,I am having some issues connecting an Intel 5300agn nic to our Wireless G access points with WPA2+Peap.Can the 5300 connect to 2.4ghz G or is it built mainly for 2.4 N on the 1250N ap, which it can happily connect to.Thanks.
#sh power inline consumptionInterface Consumption Admin Configured Consumption (Watts)---------- ----------- -------------------Fa0/17 NO 0.0Fa0/18 NO 0.0Fa0/19 NO ...
It appears that a failure from our vendor to put the ap's onto vlan 1 had caused the issues.I reconfigured the controller for vlan1 and haven't had any macflap problems.Sent from Cisco Technical Support iPhone App
