About kobilraz1

kobilraz1 · 03-21-2012

I have been using Windows7 (64bit) on all my network computers for some years now. One main computer is connected directly to the LAN port, and 4 via WLAN. Three more LAN ports are used for some VoIP equipment (non-Microsoft). All the Windows7 comput...

kobilraz1 · 10-11-2012

No. This has never been resolved. Though I have debugged this issue and proven beyond any doubt that this is a router issue (failure to comply with some broadcast specs), Cisco said that they will not fix it as this is end-of-life product.If you cann...

kobilraz1 · 04-10-2012

This is a wild guess, but might be it...I had a similar problem where the WRVS4400N (same v2 same Firmware) just locked up and stopped responding until I power cycled it, and I found out that it was because I enabled "SIP Application Layer Gateway" i...

kobilraz1 · 04-09-2012

Misty Williams,Your question is not crazy at all.Multicast passthrough was among the first things I have tried. It had no affect, as it only disables/enables multicasts coming from the WAN.I have also tried to enable dual stack IPv6, and that also di...

kobilraz1 · 04-09-2012

JasbryanThe case number is SR 621220061. I have provided them all my Wireshark capture files.Kobi

kobilraz1 · 04-09-2012

To find out what are the messages that get lost in communication, I used Wireshark to capture both sides of the communication (thanks to tjkintz99 for suggesting this tool). I had only two Windows computers on the WRVS4400N LAN (none on the wireless ...

Member Since	‎03-19-2012 04:49 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	16

User Statistics

User Activity

WRVS4400N is interfering with Windows7 HomeGroup (NetBIOS?) on wireless links(?)

Re: WRVS4400N is interfering with Windows7 HomeGroup (NetBIOS?)

WRVS4400N Drops connection

Re: WRVS4400N is interfering with Windows7 HomeGroup (NetBIOS?)

WRVS4400N is interfering with Windows7 HomeGroup (NetBIOS?) on w

Re: WRVS4400N is interfering with Windows7 HomeGroup (NetBIOS?)