About geoff.r.hill

geoff.r.hill · 10-11-2012

Good Morning all.I am trying to set up an Easy VPN connection between an 2811, and an 887 router. I am getting some errors which I cannot resolve. Your assistance in this would be greatly appreciatedThey are set up in the following manner, with the i...

geoff.r.hill · 10-12-2012

Harish, you are a genius. Thank you very much for all your help

geoff.r.hill · 10-12-2012

R3 is showing the 10.228.156.0 network as directly connected via f0/1R3# sh ip rouGateway of last resort is 10.228.156.254 to network 0.0.0.0 10.0.0.0/8 is variably subnetted, 3 subnets, 2 masksS 10.0.0.0/8 [1/0] via 10.203.4.254C 10....

geoff.r.hill · 10-12-2012

Would appear the traffic is correctly encrypted from R1 to R3, but the traffic is not returning from R3 to R1r1#ping 10.203.4.33 source vl 2 #pkts encaps: 78, #pkts encrypt: 78, #pkts digest: 78 #pkts decaps: 0, #pkts decrypt: 0, #pkts verify:...

geoff.r.hill · 10-12-2012

Although the VPN is now up, there is currently no traffic being encrypted or decrypted. r1#ping 10.203.4.1Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 10.203.4.1, timeout is 2 seconds:..Success rate is 0 percent (0/2)r1#sh crypto i...

geoff.r.hill · 10-11-2012

UDP 4500 was not allowed, but now it is. This then gave an error on R1 that save password was required, but not allowed.I re-added the config save-password and 'crypto map clientmap client configuration address respond' which removed this error and ...

Member Since	‎10-10-2012 05:44 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	16

User Statistics

User Activity

Easy VPN Assistance

Re: Easy VPN Assistance

Re: Easy VPN Assistance

Re: Easy VPN Assistance

Re: Easy VPN Assistance

Easy VPN Assistance