I have Pix 515E with multiple vpn connections going to our remote location across the country. I am having a problem where when some connects to the PIX with the Cisco Vpn client they can't access one of our remote locations through a site to site VP...
After configuring a cisco 1841 for Vpn, when I try to connect I get this error in the client Vpn logs:316 21:37:50.175 02/17/10 Sev=Warning/3 IKE/0xE3000057The received HASH payload cannot be verified317 21:37:50.175 02/17/10 Sev=Warning/2 ...
I have a ASA 5505 7.2(3)The firewall is set up w/ A inside IP network of 192.168.55.0The VPN pool is setup as 192.168.55.90-192.168.55.99What do I need to enable or create to allow the outside vpn clients to access the inside servers?
I have the statement in bold letters for the nonat statement on the hub configuration but I will duplicate that statement here:access-list nonat permit ip 10.126.18.0 255.255.255.0 192.168.252.0 255.255.255.0I mirrored the same configuration of anoth...
Made change to access-list:access-list 101 extended permit ip 192.168.55.0 255.255.255.0 192.168.75.0 255.255.255.0Still doesn't work, but corrected as suggested.