Good day, I have the following network architecture:Internet < -- > FortiGate < -- > Cisco Router (CCME) < -- > Cisco IP Phone < -- > PCThe DHCP server must be activated on the FortiGate, dose this is possible?Best regards,
good day,I have a Cisco Call Manager Express on my router it works locally (it can make calls locally), But I want that my CCME be able to do an outside call over Internet, how is that done?best regards,
good day,When I start a MeetMe conference I don't hear any sound, even though the conference has started.Below is the code in the router:(code red is the meetme code)Voice_Projets>enVoice_Projets#show runBuilding configuration...Current configuration...
Good day,I want to start installing the C9800-CL-universalk9.17.03.06.ova on an ESXI server, Is what the installation and configuration and the same as previous versions such as: Cisco-vWLC-AIR-CTVM-7- 3-101-0.ova
The problem is linked to the default-router 10.40.0.1, if we put the gateway 10.45.0.1, that is to say that all the equipment will look for GigabitEthernet0/0.45 as a gateway while the IP Phone must look for 10.45.0.1 (Router Interface) but PCs must ...
Hello M02@rt37In this case the connection will be:Internet < -- > FortiGate < -- > Switch Cisco Router (CCME) < -- > SwitchPC < -- > Cisco IP Phone < -- > Switch FortiGate, Cisco Router and Cisco IP Phone equipment must be connected to the same swit...
Good day all,@Carlo PoggiarelliThank you very much for this code, it will help me a lot and it will save me a lot of time, I created an account with voip.ms as soon as I have the necessary parameters, I will try the code that you suggested.Best regar...
good day all,Yes, a lot of things to understand and then to applicate, I study on it.First of all, does the name SIP trunk have any relation to the SIP Firmware? in my phones I use SCCP, should I use SIP Firmware instead of SCCP Firmware?Best regards...
