Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
on C2950 switch, I have connected device a.b.c.d we are able to ping this device from switch but we dont have MAC address in arp table for same IP. what could be the problem.sh arpInternet a.b.c.d 7 0000.0000.0000 ARPA Vlan1Note:-Thi...
What cause this signature to trigger?I am not using any SQL services with host 172.19.107.55, scanned host for worm and never accessed this IP 203.161.77.136 from host.any suggestion?Event ID=1214348868918579818Severity Level=3Device Name=IDSM2CORE1R...
If any one can explain me the meaning of the log on 6500.46w5d: %CSM_SLB-6-RSERVERSTATE: Module 7 server state changed: SLB-NETMGT: Got different MAC address from server 172.20.21.100 in response to ARP
FWSM module suddenly stopped responding, I was not able to access the module and FW context. Network was down so I decided it to reboot through switch (hardware module reset) and now it is working fine.Any one can guide me to find out a root cause of...
In single context mode, the routed firewall supports OSPF and RIP (in passive mode).Multiple context mode supports static routes only.Configure the static route and redistribute them into ospfHope this will help you.............Regards,Dinesh
Jon, I dont have access to that device but i am sure about IP/ default gateway is switch VLAN ip address like other device. device connected to the int fast 0/3CS2950_01#ping 10.210.1.225Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to...
