Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a series of security cameras I have been asked to nat, but with limited public IP's I am going to have to use nat.requirements are camera 1 using tcp inbound port 1024, camera 2 using port 1025, etc Do I just need these static commands to ma...
have l2l vpn connection with remote location. They have asa 5505 we have asa 5520 as firewall/vpn devices. I can communicate with EVERYTHING at the remote location except the 10.244.12.1 (asa inside interface) from headquarters. I can remote to a ...
I am having an issue where we our remote vpn users from our sister company cant connect to certain servers unless the server pings their address first. AFter it pings them, they can connect. Not sure what to look for..any suggestions?thanks
I have a 3560 in the shop that several plc devices are connected to. Port fa/03 jumps to a third party switch for the a group of plcs and they multicast heavy. I would like to block port 3 on my 3560 to keep it from forwarding it to the rest of th...
My remote vpn users (connect to asa5520 for vpn endpoint) get the asa as their default gateway. How do I make our actual core router their gateway once connected rather than the asa? Its causing them some routing issues and connectivity issues to c...
hmmmmmmm great question... I think the camera guys set them up with the internal gateway, not the firewall....so you think it could be a routing issue?
ok for the port question they arent using port 80, but the ports stated........internally I can access http://inside_ip:1024 ex but not http://outside_ip:1024
yes, I am getting hits on my access list not sure on the port question. basically the mfg of camera system left me a sheet that says tcp inbound port to be used for each item.....those ports being the 1024-1033 and the 81,8007,9898,50000 ...
