About dynamotech

dynamotech · 02-08-2016

I've been banging my head on this for a couple of days and I think I'm missing something really fundamental in my setup. So my WAN is connected to my RV320 Router (10.0.0.254) which is connected to my SG300-20 Switch (10.0.0.1). I've defined 2VLANs...

dynamotech · 02-09-2016

So, I'm probably thinking of this wrong, but each of the esxi hosts has at most 2 NICs. Between the 2 NICs, I wanted to have traffic for SAN and whatnot be separated by additional VLANs. With ACCESS, wouldn't I not be able to tag traffic on the hosts...

dynamotech · 02-09-2016

Here's the appropriate configuration: ip dhcp pool network VM Storageaddress low 10.0.102.2 high 10.0.102.254 255.255.255.0exitip dhcp pool network VM Front Endaddress low 10.0.101.2 high 10.0.101.254 255.255.255.0dns-server 10.0.0.254exit ip dhcp p...

dynamotech · 02-09-2016

Sorry, probably provided some different information. So a few things since last night... 1. I created a separate VLAN for non-esxi hosts which can be leveraged across all other VLANs (primarily DNS). The VLANS: 1 Default 2 General Static 100 Managem...

dynamotech · 02-09-2016

Thanks for the response! So last night, I did a few tests and this is what I found: 1. Static routes defined by the client (Linux box) were NOT being routed properly, even when using the proper gateway of 10.0.100.1. My uneducated guess is that the S...

Member Since	‎02-08-2016 04:42 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

SG300-20 Inter VLAN Routing problems

So, I'm probably thinking of

Here's the appropriate

Sorry, probably provided some

Thanks for the response! So