About Nick IT

Nick IT · 07-13-2017

I have cisco 3650-48fq-s with 4 TenGigabitEthernet sfp ports trying to connect to at&t 1gig ase circuit but link is not coming up. Here is the config on the port: Interface TenGigabitEthernet 1/1/1 switchport trunk allowed vlan 110 switchport mode t...

Nick IT · 07-07-2017

Thank you for the reply. 1. Does entering "config ap lag-mode support enable" on the WLC affects or reboots other WAPs that does not support lag?

Nick IT · 07-06-2017

So this command has to be entered on the access point by enabling ssh?

Nick IT · 07-06-2017

Don't we need to use command on the controller "config ap lag-mode support enable <ap name>" to manually enable on the access point?

Member Since	‎02-10-2016 06:19 AM
Date Last Visited	‎10-19-2018 09:51 AM
Posts	4

User Statistics

User Activity

Cisco 3650-48fq-s 10g sfp interface not coming up

Thank you for the reply.

So this command has to be

Don't we need to use command