About harrisp32

harrisp32 · 07-02-2022

Hi allMy first time posting on here so I'm hope you all have patience with me thanks in advance.What I have done through the web GUI is set up two vlans, vlan2 and vlan3 with different ip's with dchp pool. They work fine, and there is no communicatio...

harrisp32 · 07-04-2022

Hi Sorry for the delay.The images show what my switch shows. But I'll go through the procedure I take.After enabling L31) In "Vlan Tables" I Create vlan2 and vlan32) In "Port to Vlan", for vlan2 and vlan3 I set them to untagged3) From "Interface sett...

harrisp32 · 07-03-2022

Inter-vlan works, sort of. A pc with ip192.168.2.2 on vlan2 is able to ping ip 192.168.3.1 on vlan3. And a pc with ip192.168.3.2 on vlan3 is able to ping ip 192.168.2.1 on vlan2. However, if I ping vlan3 from vlan2 with ping 192.168.3.2 it fails the ...

harrisp32 · 07-02-2022

Thanks for the reply. Still can't get the two vlans to talk to the router because the vlans have different ip's. The router I'm using is not a cisco grade but a cheap isp type

Member Since	‎07-02-2022 02:04 AM
Date Last Visited	‎07-06-2022 12:07 AM
Posts	4

User Statistics

User Activity

IpV4 Routing on SG300-10

Re: IpV4 Routing on SG300-10

Re: IpV4 Routing on SG300-10

Re: IpV4 Routing on SG300-10