About theBGPguy

theBGPguy · 07-02-2022

I have a simple scenario as in the diagram: I am advertising a route 40.40.40.0/24 from R4 to AS 100. When I verify BGP table in the R1,R2,R3: R1#show ip bgpBGP table version is 8, local router ID is 1.1.1.1Network Next Hop Metric LocPrf Weight Pat...

theBGPguy · 07-03-2022

Thanks Jon, I now understand how it is working. Great insights thanks..

theBGPguy · 07-03-2022

Attaching the outputs of show route and show ip bgp

theBGPguy · 07-03-2022

Hi Jon, I did not use "next-hop-self" between R2 and R3. Also the above output: R1#show ip bgpOrigin codes: i - IGP, e - EGP, ? - incompleteNetwork Next Hop Metric LocPrf Weight Path* i40.40.40.0/24 3.3.3.3 0 100 0 200 i*>i 2.2.2.2 444 100 0 200 i ...

theBGPguy · 07-03-2022

Thanks for all of your insights. However after fiddling with the configs. I found that on R2 and R3 I was using network 0.0.0.0 255.255.255.255 for ospf area 0. When I removed OSPF on the interfaces R2-R4 and R3-R4. R1 started showing both the rout...

theBGPguy · 07-02-2022

I am using next-hop-self in AS100. R2 and R3 are the EBGP Routers. I am applying MED to 40.40.40.0/24 on R4 towards R2. So R2 and R3 should both see two entries in BGP table for 40.40.40.0 one with metric 0 and other with 444. R1 should also see the...

Member Since	‎07-02-2022 09:37 AM
Date Last Visited	‎08-24-2022 12:01 AM
Posts	7

User Statistics

User Activity

BGP Routes missing in IBGP neighbors

Re: BGP Routes missing in IBGP neighbors

Re: BGP Routes missing in IBGP neighbors

Re: BGP Routes missing in IBGP neighbors

Re: BGP Routes missing in IBGP neighbors

Re: BGP Routes missing in IBGP neighbors