Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an EWC deployed with about ten 9120AXI APs with firmware 17.09.04a. I have configured several WiFi networks, each tagged on different VLANs. When I restart the EWC or the core switch, which is the gateway for all VLANs associated with the WiFi...
Hello everyone,
I have 3 CBS350-24XS switches in stack, first upgraded to 3.3.0.16 and a few days ago to 3.4.0.17.
In addition to an unwanted restart due to a critical error, the main problem is switches going into boot loop, apparently due to a time...
Thank you for the quick response.I will rebooting the switches and try the wireless debug analyzer as soon as possibile.In the meanwhile, attached is the screenshot of the wireless debug analyzer. I guess there are some things that definitely need to...
Hello again,
i've not yet been able to verify the firmware version of each individual switch, but as I already wrote in the previous post, the I2C errors persist. I have attached some logs.
It is worth noting that these errors only occur after severa...
Thanks for your reply.
The 3.3.0.16 version appears in the logging.txt file because there were problems, not related to stacking, even with that version. With the 3.3.0.16 version, the switches worked correctly until, after several hours of being tur...
