Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,recently upgraded my SG350 to 2.5.9.13 firmware, and have a L3 interface functionality disrupted.previous config was (simple L3 interface):interface GigabitEthernet27description "MidRange-IP-L3 "ip address 10.1.2.3 255.255.255.248no switc...
Hi everyone,recently upgraded my SG350 to 2.5.9.13 firmware, and have a L3 interface functionality disrupted.previous config was:interface GigabitEthernet27description "MidRange-IP-L3 "ip address 10.1.2.3 255.255.255.248no switchport!and ip was avail...
that is the workaround found to have a L3 interface work ... but is not a L3 interface.putting no switchport into a new vlan and assigning ip address, used as default gateway work like a charm.but ...why? what's happened in 2.5.9.13 that this simple...
i'm sorry but your command did not work on SG350.issue follow interface.configure another port (supposing issue is caused by SFP port ). it was the same:network is unreacheable using "no switchport" feature. put in shut/no shut interface did not solv...
thank you for suggestion.sure, i will try between today and tomorrow and give you feedback, but since switch was born router mode was always activated.L3 neighbor is a firewall (asa 5505 until eol ) since network is born.
hi, this workaround does not work on 2.5.9.13.now, i downgraded and running on 2.5.8.15.(i tried on first step to shut/no shut interface)When switch boot with 2.5.9.13, ther's no way to turn on L3 interface.shut/noshut does not work.Cleaning up inter...
