Hi everyone,
recently upgraded my SG350 to 2.5.9.13 firmware, and have a L3 interface functionality disrupted.
previous config was (simple L3 interface):
interface GigabitEthernet27
description "MidRange-IP-L3 "
ip address 10.1.2.3 255.255.255.248
no switchport
!
and ip was available from any other vlan on network. (running with every firmware up to 2.5.8.15).
Upgrading to latest firmware I had to change the configuration to
interface GigabitEthernet27
description "MidRange-IP-L3 - breaked"
switchport mode trunk
switchport trunk native vlan 202
switchport trunk allowed vlan 202
interface vlan 202
name MidRange
ip address 10.1.2.3 255.255.255.248
!
...
Has this happened to anyone else? does anyone have any information about it?
how can i report the problem if it is not possible to open tac?
thank you in advance.
Loris
