About johncheung

johncheung · 12-26-2003

I am unable to push the client filter out to the vpn client from the 3005. Essentially I have a filter that allows all ip traffic which i want to push to the client. This would allow the client to establish an http session with an internal server. ...

johncheung · 11-25-2003

According to cisco doc., if we do not specify non-silent with the auto or desirable mode for PAGP, silent mode is assumed. But the next statement says that silent mode is used when the switch is connected to a device that is not PAGP-capable and sel...

johncheung · 08-13-2003

i am reading sam halabi' s excellent book called "internet routing architectures"...on p. 404, it says that for a bgp learnt 0/0 default route "no redistribution was necessary to inject the BGP default into RIP"...i tried a simple lab test and found ...

johncheung · 07-22-2003

Does this mean that instead of using "alias" dnatting i can use "alias" dns doctoring with "sysopt nodnsalias inbound" instead?john

johncheung · 07-22-2003

does anyone know how the the tunnel checksum is calculated?...it it md5?john

johncheung · 11-25-2003

Thanks for the response! Thanks for the explanation, it make sense now.

johncheung · 08-14-2003

yes it is...r2>sh ip route Gateway of last resort is 192.168.12.1 to network 0.0.0.0C 192.168.12.0/24 is directly connected, Se0R* 0.0.0.0/0 [120/2] via 192.168.12.1, 00:00:23,Se0r2>ping 100.100.100.1Type escape sequence to abort.Sending 5, 100-...

johncheung · 07-14-2003

the answer is that the denominator is the sum of the two allocate values....thanks....john

johncheung · 07-14-2003

Sorry about Q2....i am talking about outside NAT here.....so my question is does outside NAT behave the same way as inside NAT....Thanks john

johncheung · 07-14-2003

Q1) Can someone please confirm the order of nat/static command processing....Is it nat 0 acl, nat 0, static, nat ? where nat 0 acl is the first command processed and nat is the last command processed.....Q2) Does the nat/static command processing or...

Member Since	‎01-30-2003 03:14 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	22

User Statistics

User Activity

unable to make vpn client filter on concentrator 3005 work

What does PAGP non-silent keyword do?

injecting bgp default route into rip

sysopt nodnsalias inbound

how is tunnel checksum calculated?

Re: What does PAGP non-silent keyword do?

Re: injecting bgp default route into rip

Re: scheduler allocate

Re: outside nat and dmz

Re: outside nat and dmz