About rataglok

rataglok · 07-20-2022

Hello everyone,I've got an Cisco IE3000 Switch, which refuses to boot.The starting point was the following: The switch starts and is stuck in the primary bootloader, like in the following thred.IE3000 sw cannot load boot image - Cisco CommunityThe on...

rataglok · 07-20-2022

I have now set MANUAL_BOOT=no. It did what it should, boot IOS on boot, but after I've insertet the first stage bootloader. Maybe my description of the problem is realy bad, so here is the complete output of the boot process:Using driver version 1 fo...

rataglok · 07-20-2022

Hi, I am not pranking anybody. Here the output of the two commands:switch: dir flash: unable to stat flash:/: no such device primary boot loader switch: dir sdflash: unable to stat sdflash:/: no such device primary boot loader switch:They don't sho...

rataglok · 07-20-2022

Here is the output of the "set" command: primary boot loader switch: set BAUD=115200I have tried to set the BOOT_B0 and other parameters like on a working switch, but this didnt help.Here are also the output of the directorys:switch: dir List of fil...

rataglok · 07-20-2022

Hello Leo, thanks for your reply. The model number/PID of the Switch is ' IE-3000-8TC V02 '.

Member Since	‎07-20-2022 06:53 AM
Date Last Visited	‎07-21-2022 09:08 AM
Posts	5

User Statistics

User Activity

IE3000 no Secondary Bootloader

Re: IE3000 no Secondary Bootloader

Re: IE3000 no Secondary Bootloader

Re: IE3000 no Secondary Bootloader

Re: IE3000 no Secondary Bootloader