Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi
I am having a problem getting the APs to join 1 a controller.
We have 2 WLCs and the APs are configured to have HA and when some APs must migrate to one of the WLCs this will generate an error.Even some APs we had to remove the HA because all the ...
Yesterday we had an issue, one of our servers went down and we didn't understand why, looking at the logs today in one of the ports that connects the server with our switch we got the following message
Aug 23 19:24:50.346: %DTP-5-NONTRUNKPORTON: Port...
Hello I have a 3650-48PQ-S switch with IOS cat3k_caa-universalk9.16.09.04.SPA.bin try to upgrade it to cat3k_caa-universalk9.16.12.07.SPA.bin version. But this generated the following problem.
Booting...Initializing RAM +++++++@@@@@@@@+++++++++++++++...
Hello @Leo Laohoo
Excuse me, one last question,If I have the WLCs in Spain and I add the Spain zone, but I also have APs in Morocco and Tunisia which are another Zone, does this affect anything?
My doubt is because in these WLCs we have connected AP...
Controllers connect to APs from ES, TN and MA, should we remove EG and US?
I will check if the NTP Server is sending the correct information between the WLCs we have the same day, but a difference of 30 minutes.
Hello
We have a similar issue
We have factory reset the AP with the command. capwap ap erase all
And we configured it to connect to only one WLCs and it works, and when we do the HA and force it to go to the other WLCs it works. But when we want to ...
