About dractech1

dractech1 · 10-09-2012

HelloI have a problem configuring a SF 302-08P switch for VLAN. Here is my setup. I have two switches that are configured almost the same. The first switch is a SF200-24P with 12 ports on VLAN1 and twelve ports on VLAN2. The G1 port is the incoming t...

dractech1 · 10-12-2012

Tom I went backed and checked the wiring. I was 50% correct as the wiring was connected correctly according to the labeling, BUT the labeling was switched. So wish I had remembered the CDP neighbor command earlier. That was a great help and you wer...

dractech1 · 10-09-2012

TomThat looks correct.Dan

dractech1 · 10-09-2012

TomOk maybe I can explain this a little different. I inherited this project that two parts were built prior to me. The router is a Sonicwall that has too LAN connections with 192.168.1.x on one LAN and 192.168.2.x on the second LAN. That router is c...

dractech1 · 10-09-2012

ThomasYou are correct and there is a router connected to the first switch. Here is what I am trying to do. On the first switch vlan 1 is the data network and vlan 2 is a wirelss network with access points. In the router I do not allow traffic from v...

Member Since	‎10-09-2012 05:06 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

SF302-08P Switch VLAN Problem

SF302-08P Switch VLAN Problem

SF302-08P Switch VLAN Problem

SF302-08P Switch VLAN Problem

SF302-08P Switch VLAN Problem