It is supported,  now it is working we just add this parameter (QSIG ADVANCED) in the Alcatel configuraction and that´s it.

No infact the only thing that you need is this:interface Serial0/3/0:15  isdn sending-completeand in the ALCATEL you have configured the option qsig advanced thats the key.I have callmanager  with MGCP gateway to the cisco 2811 and then E1 PRI QSIG ...

Caller ID name is sent by your telco (if you pay for the service)  and this capability does not exist within CallManager. If the  carrier/telco is sending the caller ID name,  it will be displayed on  the IP phones.However,  if you are using H323 gat...