Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I was able to do this with the PIX 6(3).3 but I am having a hard time getting it to work on a router.Here is what I need to do.E0(LAN)=192.168.2.0/24E1(WAN)= x.x.x.xI need to NAT the 192.168.2.0/24 address to 172.21.2.0/24 only when going through the...
We are working on a project which will connect us to our clients for support. We purchased a 515e and have it fully configed to use for VPN. We PAT our address from 10.0.0.0 to 172.30.1.1 and it works fine. We have 5 betas connected to the PIX. They ...
I only have 2 ip addresses that I can assign to my PIX. I need to open up mail, web, and https to the outside world. Everything I have read does a one-to-one static translation. Can I do a one-to many translation like this?access-list 100 permit tcp ...
I need to set up a P-2-P tunnel between a business client and my company. We attempted this today, we got past phase 2 but could not pass traffic. Here is they way I need to have it configured.3005 A) NAT/PAT We need to appear as one address. I creat...
I have to initiate a connection from our 3005 to a borderware FW. Can this be done? I have never even worked with borderware so I am lost with what it can connect to.If any one has any ideas, please feel free to pass them along as I am going to need...
Yes, you Citrix Meta XP has a web enabld option. You can post this through any SSL based VPN. This actually works alot better then using the fat client especcialy if you have a remote sales force that need to connect to it. In the WVPN you would just...
Your best et for this is to use the ezvpn on the PIX that has the dynamic IP address. I use this on 831 routers and a bunch of PIX 501's that terminate to a PIX 515 or a 3005 concentrator. There is a trick as well to bypass all authentication or Xaut...
William, No, I dont have an answer for that. We normally do out of band access to these devices (modem) in case of a failure durning a config change or internet outage.Just to give you an idea. We have a VPN set between a 3005 and a 501. I am unable ...
I would put the 3005 parralel to the PIX. The best way to lock it down is to create rules, and then assign these rules to filters that get applied to the LAN-TO-LAN or the clients.Example, to allow port 80 to all instranet sites.(Name) IntranetInboun...
I was able to bring the tunnel up, but I have 2 issues. One is I cant pass any traffic through the tunnel when its up, and the other is I cant access the Internet when the tunnel is up. Here is the remote PIX VPN config.access-list atlantic permit ip...
