We're currently in the process of migrating off 6509s and onto 9606s. We have Bluecoat as our content filtering (which we are also migrating from). We've moved Bluecoat off the 6500s and onto the 9606s, with basically the same access lists, however n...
I've looked around and have seen no posts or bugs on this. Is there a way to sort APs by name on a WISM? We name all devices per our company's naming standard, and all APs are sorted by ID. This makes it extremely hard to find a device when you go in...
Quite a few things I've learned about WCCP and 9606s since I first posted1. Named object groups are no longer supported2. WCCP is VERY buggy on the 96063. If running more than 1 WCCP instance, the command "ip wccp check services all" must be used4. Y...
Update: Cisco Catalyst team now involved, and said there's no reason is should not work. They are still investigating Also found that if running more that 1 redirect on an interface, the "ip wccp services check all" needs to be in the config More to ...
Yes, I've read through that document about 12 times in the last 2 daysWCCP is enabled, and we see the neighbors sh ip wccp summaryWCCP version 2 enabled, 4 servicesService Clients Routers Assign Redirect Bypass------- ------- ------- ------ -------- ...
