Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I need help, I configured a C8300 Router, equipped with 2 SIMs with 2 different providers.I would like to activate only the SIM that has better signal reception in order to automatically access the Internet, how can I do this?Can I take advant...
Hi All, i have a problem with this LAB:This is the configuration of ASA:ciscoasa# sh runASA Version 9.1(5)16!hostname ciscoasa!interface Ethernet0no nameifno security-levelno ip address!interface Ethernet0.10description DATI-VLAN10vlan 10nameif DATI-...
Hy Guys, i have a problem with Redistribution in EIGRP, this is Topology:
R1 has attached the subnet 192.168.100/24,192.168.10/24, 192.168.20/24 and 10.0.0.0/30R2 has attached the subnet 192.168.200/24,192.168.50/24, and 10.0.0.0/30R1 and R2 are in ...
Hi all, I know that with vtp version 3, the problem has been solved that a CLIENT switch with a higher revision number than a SERVER switch with a lower revision number, the vlan database of the SERVER is not updated by the CLIENT.But is it really so...
Last question:PC2 need ACL for reach PC1 it's OK, but it's possibile with a command for allow all traffic from PC2 to interface with less security-level, without ACL?
This is NOW the
sh ip route on R2
D EX 192.168.10.0/24 [170/3072] via 10.0.0.1, 00:07:40, GigabitEthernet0/1D EX 192.168.100.0/24 [170/3072] via 10.0.0.1, 00:07:40, GigabitEthernet0/
Another question, why the AD of this Prefix is 170? Like a Route le...
