Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,we've a cluster of CUCM 7.1.3 and customer wants to generate only 1 CDR file per day. We set the CDR File Time Interval to 1440 and now only 1 report per day is generated. THe problem is that this file is generated at 6PM instead of midnight (to h...
Hi,I've to migrate many ATA186 from existing CUCM 3.3 to new CUCM 7.1 cluster (with new IP addresses).For test, I tried to register a new ATA on CUCM 7.1 and it works.For the migration I imported the existing ATA configs on CUCM 7.1 and everything se...
Hi,after the installation of CUCM 7.1(3) RTMT starts logging the following error from the Publisher node:At Tue Nov 24 12:27:18 CET 2009 on node x.x.x.x; the following SyslogSeverityMatchFound events generated: SeverityMatch - Alert mgetty[18471]: c...
Hi.We are migrating from a CUCM version to another and we have the problem to change the TFTP setting remotely on about 3000 ip phones with static ip address (some 7905, some 7910, some 7906, some 7940). Another solution is to change from static to D...
Hi,I've the following scenario: 2 CCM clusters connected via an Intercluster Trunk not GK controlled.One Cluster is versione 3.3 and the other 7.1.For IP extensions migration reason I need to have a RP XXXX pointing from one cluster to the other, bec...
Hi Rob,first of all thanks for your answer.I'll add some other infos to let you better understand the scenario: this report should be sent to an external billing server, so we configured CUCM to have an access this external billing server via SFTP: t...
Hi Art,all the new ATA (never installed before) register with no problem on new CUCM 7 (maybe after some upgrades).All the existing ATA (already registered on the CCM 3.3) seems to still consider the existing CallManager entry EVEN IF I changed their...
Hi Rupam,ok, but how I can change the setting on IP Phone to use DHCP instead of the static address already configured?The only way I know is to go on the IP Phone and change the setting, but we want to know if it's possible to do this remotely.thank...
Hi,ok this helps for the unregistered phones, thanks.But I still have the problem if a phone on the old cluster calls a not existing extension in the IP Phones numbering plan. In this case it matches the XXXX RP, goes to the newer CUCM (where the ext...
