About dogiiibih

dogiiibih · 03-14-2016

Hello everyone... Im trying to establish a connection to a remote peer through VPN...the tunnel interface is up 1st IKE exchange is good and the tunnel is in QM_IDLE ACTIVE state. However i am not able to ping anything from the tunnel interface no...

dogiiibih · 02-22-2016

Hello guys... I realy need some help with the following. I have a newly installed CENTOS server and i need to be able to access the server from an outside PUBLIC ip adress like (for example) 212.16.0.1 yet i can not seem to get it working i tried a ...

dogiiibih · 03-15-2016

I solved the problem it was just a subnet mismatch...damn :D But thanks a lot for your help Richard I appreciate it.

dogiiibih · 03-14-2016

I just noticed i had the wrong subnets on the extended ACL but its still not working...

dogiiibih · 03-14-2016

Hello Richard here is the thing.. The customer wants me to set up a VPN connection from 10.107.54.35 255.255.255.255 to their internal ip addresses for example 10.67.0.11 255.255.255.0 and etc. However i also have to configure a network for my intern...

dogiiibih · 03-14-2016

Hello Richard thanks for responding... Since i dont have another physical interface i could create 2 sub interfaces right? The vpn tunnel needs to be only established with 1 ip address and that is 10.107.54.35 255.255.255.255. Since the other end the...

dogiiibih · 02-29-2016

It was the firewall blocking the 9922 port i configured :D I cant believe i forgot to set a rule on our firewall :) anyways thanks a lot for helping me guys.

Member Since	‎02-22-2016 01:03 PM
Date Last Visited	‎05-03-2019 01:42 AM
Posts	14

User Statistics

User Activity

VPN tunnel through tunnel interface

SSH Connection to a server behind nat cisco

I solved the problem it was

I just noticed i had the

Hello Richard here is the

Hello Richard thanks for

It was the firewall blocking