Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I recently asked a question here about vlan routing and what to do about moving a single switch (3550). Here is the link for the curious:
https://supportforums.cisco.com/discussion/12922461/vlan-routing-help-requested
I have since looked more in...
Hello,
I recently discovered my company has a single cisco 3550 switch which apparently does the VLAN routing. I need to move that switch without interrupting the flow of traffic. I have two possible solutions and wanted to check with the experts bef...
This switch (3550) is connected via that uplink port 43 to a 2960 running ios 12.2(44)SE6.
Here is the ip route:
Fabric-Master#show ip routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - ...
Yes. This is what I am worried about, and trying to work around.
Fabric-Master#show interfaces trunk
Port Mode Encapsulation Status Native vlanFa0/43 on 802.1q trunking 1
Port Vlans allowed on trunkFa0/43 1-4094
Port Vlans allowed and active in manag...
Should I reset anything first? Here is the current output
Fabric-Master#show arpProtocol Address Age (min) Hardware Addr Type InterfaceInternet 10.20.30.6 - 000d.ed51.1c00 ARPA Vlan80Internet 10.20.30.10 2 8071.1fba.1846 ARPA Vlan80Internet 192.168....
I inherited the VLANs. Here is the output of show vlan. Just to repeat...the only port currently active on this switch is port 43 (the uplink).
Fabric-Master#show vlan
VLAN Name Status Ports---- -------------------------------- --------- ---------...
