Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,How do I configure call pickup from others phone that is ringing? Lets say if extension number 3001 is ringing and I am currently at 3002 phone's, can I pickup the 3001 phone? How does the configuration looks like? Thanks,Zul
Hi guys,I have configured COR on my C2911 for my CME 8.6 but it didnt work. Based on my configuration below, Phone1 should be able to call only international call but the Phone1 still manage the International call. I dont know what I have missed, but...
Hello guys,I'm having difficulties here on assigning different extension to different voice-port. Currently I have 4 incoming lines (PSTN) to my FXO port router (c2911). Lets say if I wanted to assign 2 FXO ports to specific extension and the remai...
forgot to add international dial-peer:!dial-peer voice 900 pots description ***Dial-peer_for_InternationalCall*** translation-profile outgoing out destination-pattern 900T progress_ind alert enable 8 port 0/3/0:15 prefix 00!For this dial-peer, it has...
Okay, here is my situation; I have 10 extension numbers, range between 3001-3010. I wanted to allow only ephone-dn 1 and ephone-dn 2 that can call international number and the rest of the ephone-dn cannot call the international number. But if I ha...
Hi Markus,I just removed the COR on ephone-dn 1, yes it still manage to call international number. There were no changes after I put the COR or remove the COR at ephone-dn 1, international call still can be made. Seriously, I have no idea how to solv...
Hi Markus,Yes, supposedly ephone-dn 1 can call the international number but it did not work. I have tried the same configuration on different dial peer and still the configuration didnt work. From my configuration, it seems like everything is fine in...
