Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a design attached.My question is if I do not want to purchase any additional switches can I connect the devices to the 6509 and put them in their own separate vlans?I am a little fuzzy about the physical connections needed to make this design ...
Is it possibele to set up QOS based on Vlans assignments?I want to guarantee that a certain vlans traffic is always sent first before all other traffic in times of congestion.Is there a way to accomplish this?Thanks!
I have (2) Sup 32 configured in a 6509 chasis. I have 1 power supply plugged into the wall and 1 power supply that is not plugged into anything but it is in the chasis and has green light to show that it has been recognized.My problem is the "system ...
I have 2 routers that each have vwic3-2mft-T1/E1 cards in them. I want to connect them together back t back in a lab type setting and simulate WAN connectivity by setting clocking on one of them. Is there a way to do this with my current setup or do ...
DanThank you!You have been a great help!Like I said I was fuzzy about how to connect the devices and you have cleared that up in a matter of minutes.I hope this site continues to have great resources such as yourself to assist myself and others with ...
DanielFor Clarity, 6 physical connections to the 6509.HSRP 2951 connectionsHSRP Cisco FW connectionsHSRP Checkpoint connectionsLogically Vlan everything and no physical connections from one device to another.
DanielFor clarity 6 physical connections to 6509.HSRP 2951HSRP Cisco FWHSRP CheckpointAre there any physical connections from the checkpoint directly to the Cisco Fw and from the Cisco Fw to the 2951 as designed?
Daniel thanks for the response. The vlans on the document needed to be moved up one level to show how I want to segment everything. I know I can purchase additional switches to make this happen but I wanted to try and accomplish this without spendin...
I thought that too but the Cisco Technician thinks it is a hardware issue. I will change the Sup modules out since he is sending me 2 new ones but I think this issue will still exist as long as the power cable to the power supply is not plugged in t...
