Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Anyone know what this error is? Or Which VTT its referring to? I have a pair of VSS 6807-XL with quad Sups - I know that each chassis has 3 VTT modules, i am unsure where the error is pointing to?
%C6KENV-SW1-4-VTTFAILED: VTT 8 failed
%C6KENV-SW2_STB...
Installing 5 new VG350,s, have 2 installed and randomly they have no dial-tone. I have practically read thru all the discussion on VG's and found this same problem using SCCP & in fact changed the In Hold-Queue to 300. I have 2 i had to put back on m...
I found where some folks moved the plar from the CUCM to the VG, and it works fine now, also as Bug CSCe01737 suggests. The only thing is, the PLAR gets a dial tone after the called party hangs up even having the no tone dial-tone remote-onhook confi...
Did you ever find a solution to this, i am dealing with this, i am getting ready to open a TAC case as I cannot find anything on the community of why this is happening. There seems like there should be some setting or timer. Thx
Well, i just got another port today that just has a fast busy on it. Did a shut/no shut on the VG port and reset it in call manager did not fix. I had to move the line to a different port and have the VG set to reload tonight because that seems to be...
The only parameter added on the voice-ports for me was the disconnect-ack option, but not sure that fixed the problem, we have not had any problems or complaints since. I dont have the ports shutdown on the VG, they just are not configured in the UCM...
