Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I set up a VPN connection btw c831 & VPN 3000. The connection is up but there is no traffic goes thru. I would like to know if I need to configure the VPN 3000 to encrypt the packets. If yes, how should I do it? In the c831 router, I have configured ...
Hi Expert,I have some routers which can not sustain the ISDN layer 1 & layer 2 statuses correctly. Whenever, the ISDN line is manually activated or the ISDN BRI ports are manually reset, the layer 1 & layer 2 statuses become active but they become de...
Hi Everyone,I've logged a ticket to the provider before I put up this issue in the FORUM. The Sercive Provider said that the functionality of the ISDN is in working condition. From my observation, there is no signalling between the router and the ISD...
Hi,Due to the instability of the Telco circuit, the customers requested to monitor all the ISDN lines to ensure that the lines are readily available to connect when the main link goes down. The statuses of layer 1 & layer 2 should be active under the...
Hi GP,Thanks for your prompt reply.I've removed the command "backup interface xxx" in the main link and the problem does not seem to go away.From CISCO website, it mentions that a circuit is properly functioning (Layer 2 is Multiple Frame Established...
Hi GP,Below is the configuration,username router_1 password password_only!interface Serial0/1 bandwidth 1984 backup interface Dialer1 ip address xx.xx.xx.xx 255.255.255.252 no ip directed-broadcast ip ospf cost 500 no cdp enable!!interface BRI1/0 no ...
