Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have set up distribution times on the devices, but they appear to be referring to the UTC time on the CE and not Local time. Is this correct? If so does that mean that i need a separate device group per timezone to compensate for differences and d...
In ACNS 5.X when you set up a hierarchical location tree, how does distribution allocation occur???By this i mean that if i have 3 location levels, level 1, level 2 and level 3, with 1 root CE in level 1, 4 CEs in level 2 400 CEs...
I want to know if Unity 4.0(2) supports two nics with different ip addresses. It currently has both active, but when i check the VM ports on the Call Manager, Unity has registered into CCM with the IP Address of the second NIC, which is non-routable...
We are experiencing exactly the same problem, bot for a fresh install, not an upgrade. Once again, the exchange ORG level admin is outside of our control and at the moment they are not providing the Exchange Admin rights that we require. Is there a...
Brian,Are the above four lines the only lines in the ACL?? if so then you need a line to actually permit some type of traffic as there is an implicit "deny any any" at the end of the ACL. i.eaccess-list 104 permit ip any any
When you use the command:frame-relay traffic-rate 640000 1024000the router implements its own values for bc, be and tc etc. Effectively your mincir becomes 640000 (divided by the number of intervals per second) and the router will set up a value for...
