Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I’m having a problem getting VLANs set up between my 3640 and my DLINK DES-3226L .We have 5 ISPs and a /30 between them then a /24 or /27 of additional IP space which our NAT box (FreeBSD server) takes and NATs out to our internal servers.The only su...
Hi,Our CPU is always at 99%. I managed to log into the router to kill some of the NAT and got it down a bit.Is there something wrong with our config that will cuase it to lag?Here are the big % CPU processesCPU utilization for five seconds: 71%/18%;...
Hi,We are having problems routing our 192.168 addresses to the internet. When we add a default route it works fine but pushes out through that default route. Any ideas on what we are doing wrong? We have tried 100 things but nothing seems to work:!...
We have a data center and 4 different providers (FastE hand off's to them).can we route traffic to each provider using the 4 port etherswitch card using the 2801 and hook our switch up to one of the on board 10/100 ports?Any help would be great.Thank...
Thanks for the reply.I'm waiting on Saturday Delivery for a 2924-XL-EN.I figured the DLINK is no good so I just got a new switch.Hopefully it works out.
That worked great!1 more question:From 192.168.100.xxx we can't ping 192.168.101.xxx but we can ping the gateway. From 192.168.101.xxx we can ping any 192.168.100.xxx host.How can we ping and talk to both networks?Thanks!
Jaison,We need static routes to specify using two different ISPs for different types of traffic. We want certain subnets to push out on one interface, and other's to push on another interface.Can you expand on why this isn't working for us with our c...
