Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, everyoneFor priority queueing, we know there are 4 queueing (high, medium,normol,low). And I can configure all unmatched traffic is in default queue. What I want to know, Can I just configure two queues (high and normal), just one list is point t...
Hello everyone,I have configure the transparent fwsm(version 3.1) on Cat6500, I found I can't ping BVI interface from MSFC and I have some questions as below:1, For transparent fwsm, are there other ways to access the fwsm module except "session slot...
Hi, everyone.I have a problem when I configure two 3550-emi switch. On both 3550 switch, I have configured FEC link on fastethernet port 0/3 and 0/4. But only link is up at the same time. The log say: %EC-5-L3DONTBNDL2: Fa0/4 suspended: incompatible ...
Hi, guys. I have a question about Private Vlan and HSRP implement. In my network topology, there are 2 switch 6509 as core switches and Internet outlet. There are a 3750 as a distribute swtich, and 3550 as a access swtich. the topology is as below: ...
I have some puzzles on configuration qos on 7609 with sup720-3B and 6724-SFP line card as below:transmit queue capability for 6724-SFP: 1P/3Q/8Tquestion 1:as we konw, traffic on PQ will be forwarded before other standard queue, and WRR can allocate d...
Thanks for Vikram's reply.I have slove the icmp ping problem. After add two icmp commands directly to outside interface, not in ACL, Ping can work.But the problem is telnet didn't work for the bvi interface, even though I have configure "telnet 0.0.0...
Dear Vikram,Very thanks for your reply.My topology and configuration is as attached file. 1，Server A can ping Server B, but MSFC cannot ping MSFC BVI interface; 2, If the second topology there are 3 inside vlan as HR, RD and market server, located ...
Thanks, Mood.I have try it again. And I found when i change channel-group mode to on from desirable, it is ok. But when i change to desirable again, same result. But port-channel interface is up always. Who can give some advise. In production network...
