About jomassanell

jomassanell · 03-17-2009

Hi,I have 2 routers 7201 wich has connectivity with various ISPs.First router has connectivity with ISP A and ISP B1, and router B has connectivity with ISP B2, wich acts as backup of ISP B1 of router A.These routers have configured BGP.By default, o...

jomassanell · 01-27-2009

Hi,I'm trying to upgrade IOS in Cisco 7204VXR.Actually, it's working c7200-ik9s-mz.123-5a. I've tried to upgrade to c7200-ik9s-mz.124-23, and I've change boot system to disk2:c7200-ik9s-mz.124-23.bin, and other IOS, but everytime I restart the router...

jomassanell · 03-17-2009

I think maybe I can use multiple stateful failovers, one for link redundancy and another for router redundancy.Is possible configure 2 out inspect rules in same interface? I would be configure 2 HSRP groups.If this is possible, router inspects two ti...

jomassanell · 01-27-2009

Is not possible configure either boot system disk2, neither can execute sh flash: or dir flash:I tried to enter in rommon mode, and console output shows this message when I push Ctrl+Pause:*** TLB (Load/Fetch) Exception ***Access address = 0x0 PC = ...

jomassanell · 01-27-2009

I attach console output. Remark that actually i'm tried to execute the new IOS by means of boot system flash c7200-ik9s-mz.124-23.bin, but I've tried to execute boot system flash disk2:c7200-ik9s-mz.124-23.bin and the output is the same.

jomassanell · 01-27-2009

Everytime I upload a new IOS, I execute:- no boot system- boot system flash disk2:iosRouter#dir disk2:Directory of disk2:/ 1 -rw- 28776396 Aug 31 2004 15:25:28 +00:00 c7200-ik9s-mz.124-23.bin 2 -rw- 18613056 Aug 31 2004 15:27:36 +00:...

Member Since	‎10-20-2004 01:22 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	6

User Statistics

User Activity

Firewall Stateful in IOS Firewall active/active scenario

Upgrade IOS Cisco 7204VXR

Re: Firewall Stateful in IOS Firewall active/active scenario

Re: Upgrade IOS Cisco 7204VXR

Re: Upgrade IOS Cisco 7204VXR

Re: Upgrade IOS Cisco 7204VXR