i'm trying to tftp a new copy of the latest IOS as the current image in flash is corrupt.i got the tftp commands from the config guide but i keep running out of disk space.i need to be able to delete the existing image in flash but i can't find the ...
im trying to understand how this worksi have a PIX with 2 interfacesthere is an access list applied to both interfaces and the associated access-groupthere is also another access list which is set to 'ip any any' and it is attached to a nat 0 stateme...
HiWe have a firewall here with 100s of lines of statics.eg static (inside,outside) 10.1.1.1 10.1.1.1 net 255.255.255.255could i replace this with a nat (inside) 0 0 0 ?
set WAN port on Your PIX firewall90.90.66.239 - 255.255.255.4default gateway 90.90.66.1i note you have corrected this netmask on the outside interface to 255.255.254.0set lan port on your firewall90.90.67.112 255.255.255.248Your default gateway (lan)...
thanks for the replyi was just using that as an examplei have public addressing on both sides of the firewall and the statics are basically saying dont translatestatic (inside,outside) 203.111.45.10 203.111.45.10 net 255.255.255.255correct me if im w...
thanks for the replyi was just using that as an examplei have public addressing on both sides of the firewall and the statics are basically saying dont translatestatic (inside,outside) 203.111.45.10 203.111.45.10 net 255.255.255.255correct me if im w...
just to expand on that, this is what i have as a configaccess-list all-ip-packet permit ip any any nat (inside) 0 access-list all-ip-packetthen i have a whole bunch of statics saying do not translate any outbound addressesstatic (inside,outside) 10.1...