About ChristianJoel

ChristianJoel · 10-07-2022

Hello!I have two catalyst 2960 24TT-L switches, and I cannot get any output from them via the serial cable. I have tried using both PuTTY and TeraTerm, and made sure the serial cable is not defective. I have also tried switching BAUD rates, but that ...

ChristianJoel · 10-26-2022

Thank you for the response. I can confirm that the computer I am using is working correctly with other cisco equipment. I have also tried using a USB console cable but that didn't work either. I will have to check with my school admin about Cisco TAC...

ChristianJoel · 10-23-2022

I would first like to apologize for the late response. I am trying to tshoot this issue for a school I work at and don't have access to the equipment on all days. With that said, I did get a show line and a show line console 0 output. One thing I not...

ChristianJoel · 10-20-2022

So interestingly, the way I was able to get this output is by using telnet. I can blind type commands by guessing what's on the screen while using console cable. So I configured vlan 1 to use DHCP and enabled secret for priv exec and vty lines. Isn't...

ChristianJoel · 10-17-2022

This is one of the switches with no console output.

ChristianJoel · 10-14-2022

Here is the running config on one of the Switches.

Member Since	‎10-07-2022 02:27 PM
Date Last Visited	‎11-27-2022 03:03 PM
Posts	12
Total Helpful Votes Received	5

User Statistics

User Activity

Catalyst 2960 24TT-L - No Console Output

Re: Catalyst 2960 24TT-L - No Console Output

Re: Catalyst 2960 24TT-L - No Console Output

Re: Catalyst 2960 24TT-L - No Console Output

Re: Catalyst 2960 24TT-L - No Console Output

Re: Catalyst 2960 24TT-L - No Console Output