Why Type-2 LSA are propagated in between R1 and R5(Area 1)? here is my configuration
R1#show ip ospf database
OSPF Router with ID (192.168.10.1) (Process ID 1)
Router Link States (Area 0)
Link ID ADV Router Age ...
Here is my configuration
R6(config-router)#do show ip eigrp topology
IP-EIGRP Topology Table for AS(1)/ID(6.6.6.6)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status
P 5.5.5.5/32, 1 succes...
As we know VLAN 1 is by default "native". All control traffic(CDP, LLDP, STP BPDUs, etc) uses this native VLAN 1 and it is not eligible for VTP pruning
1. What if I set VLAN 10 as "native"? then CPD, LLDP, BPDUs uses this VLAN 10 for their communica...
Hi all,Imagine there is a switch having 3 port(Fa0/1, Fa0/2, Fa0/3). Fa0/1 is connected to a PC, Fa0/2 is connected to another switch and in the same way Fa0/3 is connected to another switch.Then I configured Fa0/1 as FastPort.1) Now what is use of s...
Hi iplenbrook,In addition to below comments, i want to mention one more point: it is better to bundle powers of 2 (2^0, 2^1, 2^2, 2^3.....)link in ether channel, then only you will good performance. In same way you can bundle 3 or 5 links in ether c...