Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have encountered an unexpected issue. Despite trying various troubleshooting methods, we have been unable to identify the root cause. We would appreciate expert guidance and recommendations.Problem SummaryWe are experiencing an issue with Cisco IS...
Hi there,We are trying to implement PBR on FTD v7.0.4 managing by FDM. The route-map object has been created by Smart CLI and could be verified in 'running.conf'. While applying the route-map object, although the task was completed, I couldn't find t...
After further investigation, I found that the issue was related to the username format ... The TACACS authentication requires the username to be entered in the fully qualified format (e.g. username@domain). When the domain suffix was included, authen...
Hi Dustin, Thanks for your help. I’ve confirmed that both the command set and the profile are configured correctly, but I’ll try two other commands to see if that helps.
Hi Rob, Sorry I was busy preparing CISSP exam and passed today.Here is what I got from show run related to route-map. The policy-route didn't appear under Ethernet1/6!
interface Ethernet1/6
nameif guest
cts manual
propagate sgt preserve-untag
p...
