Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How many links are carrying the RSPAN VLAN? If you are truly only spanning these two ports and not an entire VLAN, that doesn't quite sound right. Are these two ports in the path of the packets that you are spanning? Are you certain these are the ...
Drops/flushes on a VLAN interface indicate some level of traffic hitting the MSFC CPU meaning that some of your traffic is being software-switched. While this is normal for some traffic types (ARP, routing protocol packets, etc.) there was a point i...
The IEEE 802.3af standard is implemented on various phone vendors, whereas the Cisco pre-standard power is Cisco proprietary. So, it will limit you to using Cisco phones. This isn't really a problem, but if for some reason you have an access point ...
Hello,There is indeed an option to do this through a policer configured through a policy-map, as described here:http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea7/scg/swqos.htm#wp10455161 Mbps is in fact the lower bound of a configu...
Hi there,Usually the most efficient way of selecting a stable version of IOS/CatOS is to take a look through the release notes at the caveats section and verify if there are any issues that would affect your network directly. In addition, working wi...
