Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Sometimes, if i add a device to LMS 2.6, it doesnt appear in the DCR straight away, but does show in the "devices not configured in ACS" report. However the devices are in ACS, and after i stop/start dmgtd, the devices appear in the DCR.Obviously i d...
Im just looking into some disaster recovery scenarios, and i have the following questions which i dont seem to be able to find answers to within the documentation.Scenario is a switch was working fine before, and has been backed up with LMS. Its comp...
Hi,Im using LMS primarily for configuration management. We use HP Network Node Manager for fault management. Ive never really looked at DFM as ive always seen it as overlap with NNM. Now, my question is what does DFM provide that NNM cant, or what do...
Ive been playing around with the baseline compliance within RMe on LMS 2.6. First of all, there isnt a lot of decent documentation within the help section IMO. Is there a white paper or some other source of knowledge for these compliance checks ?Seco...
If i create a baseline template using the "Cisco 3800 Series Integrated Services Router" as the device group (the content of the template can be anything, but the same behaviour is apparent), and attempt to run a compliance check, it gives me the fol...
Thats just the answer i was looking for. Spot on as ever Joe. Ive had a quick look on the LMS whitepapers page and cant seem to find any more info on DFM. Does any exist? Ive got the LMS deployment guide, but would prefer something a bit deeper if po...
I know exactly what you're talking about here. When you run a syslog report, the max amount of syslogs you can see through the GUI is 10,000. Unlike many other apps within CiscoWorks, it doesn't appear to allow you to scroll to the next page, it simp...
Yes, its integrated with ACS 3.3(3) iirc. We have 2 LMS 2.6 installs and it happens on both of them. Ive also tested it on 2 LMS 2.5.1 installs and it works fine on these.
I hadnt installed the patch unless its part of the LMS 2.6 upgrade bundle. I will download and apply the patch to see if it resolves this issue.ThanksNick
Error as promised:HTTP Status 500 - Internal Server Errortype Exception reportmessage Internal Server Errordescription The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.exceptionjava.lang....
