About jfwarren1

jfwarren1 · 12-10-2014

Have three new products on Test Bench:CT2504 WLC w/ver 8.0.100.01702i LWAPP w/ver 15.3(3) JASG300-28MP Switch w/ver 1.3.7.18 (DHCP configured on switch with Option 43.)(no DNS server available) All three devices can ping each other but thats as far ...

jfwarren1 · 02-12-2014

Hello, pre 8.3 I would use the Name Command and static map a public IP to a private IP as follows:name 12.236.93.72 InsideHoststatic (inside,outside) InsideHost 10.11.10.1 netmask 255.255.255.255Post ver8.2 I realize that command has changed to the o...

jfwarren1 · 11-16-2009

At my edge I've been using an 1841 as an edge router following by a ASA5505 and then to a L3 3750 Switch. My handoff from the ISP (AT&T) is Metro based ethernet (ME-3400 @ 10Mbps). My edge equipment has been working fine for 1/2 year until we upgrade...

jfwarren1 · 06-11-2009

I've been struggling with both the Cisco 1841 router and ASA 5505 in trying to assign public IP's on 2 vlans I'm trying to create so both vlans can be segmented but have controled traffic between each other via ACL's. The CLI on both the 1841 and th...

jfwarren1 · 12-11-2014

Ok,up and running. Rasika was right. There is bug in 8.0.100.0. concerning the new 1700 series AP's. Got 8.0.100.6 from TAC and the "Discovery" process worked. System running. Thank you all for input.

jfwarren1 · 12-11-2014

Thanks Rasiki, I opened a case today. Going over the compatibility documents I also noticed that the 1702i LWAPP software I am running, 15.3(3)JA, may need to be upgraded to the current 15.3(3)JAB.All the configuration / reference material for the 17...

jfwarren1 · 12-10-2014

Thanks for the link. I do have a SHA2 Block and also have a valid SHA2 certificate on the AP and WLC. Will have keep digging.

jfwarren1 · 02-12-2014

Thanks so much!!!

jfwarren1 · 06-11-2009

Thank You. This has been quite an educational experience. I am only CCNA, and this vlan database was not covered in my studies. Thank you again. This item is fully resolved.

Member Since	‎06-11-2009 09:46 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	16

User Statistics

User Activity

New LWAPP 1702i not joining new CT2504 WLC

ASA post ver8.2 Static NAT & Name Command

Can a 1841 handle a 100Mbps ISP ethernet handoff?

Assigning Public IP's to Vlans

Ok,up and running. Rasika was

Thanks Rasiki, I opened a

Thanks for the link. I do

Re: ASA post ver8.2 Static NAT & Name Command

Re: Assigning Public IP's to Vlans