Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have setup of couple of Unifi switches, along with Meraki firewall. Meraki firewall has 4 VLANs one default with ID 1, and following VLANs with their respoective IDs: ID 10, ID 50 and ID 90. All Unifi switches are connected through uplink por...
Hello,Have bunch of events logged in MX64 event log, for 2 different devices, reachable over network with each having proper DHCP IP from default VLAN and pingable. Have one default VLAN 192.168.16.0/24 and Guest VLAN192.168.9.0/24. Can anyone elabo...
Hello everyone,Hope I can get some help on this.We have domain controller acting as DNS server behind MX64 appliance. There are only 2 Layer7 firewall rules, denying All Gaming and P2P traffic. Recently we have been having issues with some users gett...
Hello,I am hoping someone with enough time and patience will be able to help me with this problem I am having.My topology is as follows:Have UniFi AP connected to UniFi switch -> also from that switch (US-8-150W) I have connection to Cisco SG300 swit...
Hello,I am hoping someone with enough time and patience will be able to help me with this problem I am having.My topology is as follows:Have UniFi AP connected to UniFi switch -> also from that switch (US-8-150W) I have connection to Cisco SG300 swit...
Hello guys,Thank you once again for your time and effort.Just to note, I marked @Rasmus Hoffmann Birkelund answer as solution, as I already tried everything as @Rasmus Hoffmann Birkelund, but was still having issues. Seems that the problem was faulty...
Thank you. I have some phones that were connected and working on default VLAN1 before this deployment, and now I am doing changes to get the phones to separate VLAN. So I can see in Meraki there are still leases for VLAN1 for some of the phones. As t...