About Gugolsan

Gugolsan · 03-21-2024

Hello! I'm currently working on lab 6.3.2.3 Packet Tracer - Prototype & Test the Solution. The basic logic is to monitor the current status of garage doors. I wanted to add to Home Wireless Router, expect laptop and pc connected to it, one more pc by...

Gugolsan · 11-19-2022

Hello, I'm using Cisco Packet Tracer and trying to configure VLANs and routing between them. Here are two tables, which I have used for configuring:DeviceInterfaceIP addressSubnet maskDefault gatewayR1G0/1.1192.168.1.1255.255.255.0- G0/1.10192.168.10...

Gugolsan · 11-20-2022

Thank you so much, forgot about native...

Gugolsan · 11-20-2022

So what should I fix then? You said that trunk native VLAN for Switches should be VLAN1, I need VLAN123 for that thing. Should I change something in Router configuration?

Gugolsan · 11-20-2022

I have done these commands for S1 cause I need actually native VLAN to be VLAN123: S1(config)#int range fa0/1,fa0/5S1(config-if-range)#switchport trunk native vlan 123S1(config-if-range)#switchport trunk allowed vlan 1,10,20,123 The similar thing is ...

Gugolsan · 11-20-2022

This is bad for safety, if I don't want to config like that?

Gugolsan · 11-20-2022

How can then i fix it?

Member Since	‎11-19-2022 05:42 PM
Date Last Visited	‎05-30-2024 01:01 AM
Posts	26
Total Helpful Votes Received	10

User Statistics

User Activity

Adding PC to control garage doors

Can't ping Switch from PC (using VLANS)

Re: Can't ping Switch from PC (using VLANS)

Re: Can't ping Switch from PC (using VLANS)

Re: Can't ping Switch from PC (using VLANS)

Re: Can't ping Switch from PC (using VLANS)

Re: Can't ping Switch from PC (using VLANS)