Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am setting up a vlan access map but I cannot get dhcp to work a host cannot pickup an ip address. Here is the config.interface Vlan200 description Infx ip address 10.79.200.1 255.255.255.0 ip helper-address 10.79.1.90 arp timeout 1!vlan access-map ...
I have a 501 at a branch office that I need to port forward www, ftp and rdp to 3 diffrent hosts. The outside interface is dhcpand the inside is 10.50.1.3the network is 10.50.1.0/24Below is what I thought would work but it is not portforwarding. Can ...
Is there a way that I can monitor if a vpn tunnel is up or down? I know you can do sh cry isakmp sa or via the asdm but that does not alert me if a tunnel is up or down, or give me any historical data about the tunnel.I tried via solarwinds but it on...
I have two 2801 routers. One of the routers has a t1 wic. The outside t1 wic has an ip of 10.1.1.1 and the inside has and ip of 10.1.1.2The second router is a vpn connection that will be used for redundency. The inside ip is 192.168.1.1 and the outsi...
I would like to see vpn's configured as a virtual interface just like a vlan.This way I can just add the virtual interface to my monitoring soultion and monitor it just like the rest of the interfaces.Santa can you bring me that for christmas?
This seems to be a never ending question. I think thatCisco works and cacti can monitor them but its cumbersome either to setup or to managage.What I want is solarwinds orion or even another easy network management tool to provide this functionality....
