About david.chaine

david.chaine · 05-07-2015

I have a switch SG300-10. I configure 2 VLAN ==> VLAN10 and VLAN20. I want use port G09 only with VLAN10 (PLC network) and port G10 only with VLAN20 (Input cable to Internet access). What's the best setting for port G01 if I want use VLAN10 and VLA...

david.chaine · 05-13-2015

Hi Mike, I want try a last configuration before call the tech support. I put G10 on Vlan10 (192.168.10.0 for PLC access) and G09 on Vlan100 (192.168.100.0 for internet access via my server switch). I configure G10 trunk - Vlan10 (untagged type) and...

david.chaine · 05-12-2015

Hi Mike call your support center is a good idea but do you have a french support?

david.chaine · 05-11-2015

Hi Mike, is it normal when I try to add the configuration in the IPv4 Interface Table my switch crash. If I try to configure the IP Address of my Vlan on DHCP I don't have any problem. Do you have a example of configuration? TY

david.chaine · 05-08-2015

I want use this switch in layer 3. The default gateway is 192.168.1.0 for VLAN10 and 192.168.2.0 for VLAN20. In the port G01 is my PC. Can you explane me what's the difference between untagged and tagged. Why you use untagged for PLC network and tag...

Member Since	‎05-07-2015 05:25 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

SG 300-10

Hi Mike, I want try a last

Hi Mike call your support

Hi Mike, is it normal when I

I want use this switch in