Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Our current network (subnet 10.24.167.0) uses a Sonic Wall firewall (10.24.167.254) as the gateway and PAT device to our router.The owner wants guests to be able to use our internet wirelessly but have no chance of getting on our network.I want to pu...
I have never dealt with PIX firwalls (I am fairly new in the field). I have a customer that has a 506E. I need to create a static NAT map on it. I have tried and tried with no success. Can you please give me some guidance (with ACLs and the NAT)?...
I am loosing my mind with this one. Pehaps someone can shine a light on the problem.I have a machine inside the local LAN that I want to TELNET into from the WAN. I can TELNET into this machine from anywhere in the LAN with no problem.I setup stati...
I came apon a job whose network layout is kind of tricky. Here is the skinny:2 routers (both 1721s). One is SBCs and it plugs into the internet on WIC interface. Nic interface plugs into a PIX 506E Firewall. The firewall does the PAT. The other...
I have a 1721 router, and a 506E firewall with NAT.Inside the network, we have a machine in which we wish to telnet into from the outside world. I have the router setup with static NAT so that machine has a public IP.I can ping that public IP succes...
Thanks for the reply. Would I then need to issue an Access-Group command to apply that ACL to an interface? Can you please show me what that command would look like?Thanks.
The firewall is actually a SonicWall Pro 3060. The only Cisco equipment in this picture is the router. I bet the system I am trying to telnet into has the wrong default gateway. I didn't think that it would matter. I will check on that.Thanks for...
I just came from the clients office. I am a little lost here. I am quite nifty at the CLI of a router or a switch, but every other firewall I have dealt with (Sonicwall, Watchgaurd, etc) has had a web based GUI. I am new in the field and have neve...
Hmmm...I am not sure why the franchise router would ever see traffic (especially inbound) after it hits the firewall.I am not doubting you, you are obviously knowledgable! I just want to understand the reasoning!Thanks!
