Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys, i was configuring auth-proxy . i had am/c---(inside)router(outside)---internetnow i want that a normal user is not able to get the telnet access of my router, only certain users can have the telnet access fromt the inside. i dont want to use...
Hi guys i am a bit confused, please help me ..RTR2----(Outside)ASA(Inside)----Rtr1the outside n/w range is 192.168.1.0/24 with Rtr2 having .2 and ASA having .1the inside n/w range is 192.168.2.0 with asa having .1 and Rtr1 hving .2now i want to perfo...
Hi folks , i was trying to configure IOS easyvpn with vpnconcentrator. i am using an external group which is configured on acsserver.the configuration for ios eazyvpn iscrypto isakmp policy 10 encr 3des hash md5 authentication pre-share group 2crypto...
Hi all, i was trying to authorize the asa with acs 3.2 on priv lvl 7 using tacacs+,but the users were geting priv-lvl 15 only..aaa-server aaa_serv protocol tacacs+aaa-server aaa_serv host 10.0.0.10 key cisco123aaa authentication serial console tac_se...
i was trying to setup remote access vpn between ios router 12.3 and vpn client 4.x, using microsoft ca.. but i was unable to connect with vpn client .. i dnt knw where i m going wrong .. my rtr cfg is as followsversion 12.3service timestamps debug up...
Hi rohit, i am looking to deny a specific user from getting the exec shell of my router with radius authorization.. the above attributes will assign a user a priv level 15...
Hi matti . i have the following setuphost---(inside)Pix(Outside)---Rtrhost ip address 10.0.0.10Pix Inside 10.0.0.1Pix Outside 172.31.0.1Rtr IP add:172.31.0.2(Rtr having a deault route to pix)i tried to configure outside nat, but its not working.hostn...
