Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there a way to check basic Meraki switch hardware health metrics? Unit temperature, fan speeds, any internal failures?The "device health" tab seems to only expose some hardware statuses (CPU: good / poor; memory: good / poor, etc.) - but I see no ...
It looks like Meraki GP is blocking traffic to an "allowed" URL simply because of trailing space in the "host" field of a GET request. The request is otherwise legit. Putting it here not to seek solutions - but in case it's indeed a bug (undocumented...
I am hoping it's something simple. Getting "DHCP problem" type 'extra: no_offers_received, vap: 0, vlan: 255' errors in Meraki on VMs set to that VLAN 255. All other VLANs - no issue, with VMs getting their DHCP IPs just fine.The vSwitch is set up ju...
A number of our older MX devices (MX64 and MX100) got flagged with "Firmware status: critical". The "critical" part: what is it about?something specific the firmware updates are addressing (like zero day vulnerabilities)just the fact that the devices...
What do "bursts" of port disconnects and reconnects signify or mean, as opposed to single such events?(Can't wrap my mind around the idea that multiple port disconnects and reconnects can happen all within one second, and several series of such disco...
Thank you.I'll then keep looking for a device / instrumentation ecosystem where telemetry critical to reliability is exposed. Already see quite a few, including with enterprise class feature sets.
@Mark Holt wrote:Hi Shane,i had a similar issue and was lucky that we had some acoustics engineers who worked for us, they took some measurements "in real world" in an open plan office with switches in a rack (they type you would put in a smaller off...
@redsector wrote:I made cases for my switches which are doing high/low fan speed.Merkai sent me new switches and now the fan speed is good.This is awesome - yet in our case the switches are mostly sitting in network closets and the concern isn't nois...
Thanks for the thoughtful questions. Both. The priorities at the moment:Safe to deploy / operate? I.e. is a switch we have in our inventory and sitting on a shelf good and safe to deploy? (Can't assume it's good if no issues come up when connecting t...